Jetski Exterior Washing
Jetski maintenance is much the same as a boat or car. To keep the exterior finish looking its
best, mix up a bucket of Buster50 and use a sponge to wash over the external body of your ski. Leave
Buster50 on for a short period without allowing to dry, rinse with fresh water and chamois of the excess
water. The active ingredients will remove the salt and grime, protect any metal components and protect the wax
and gel coat finishes. Buster50 need only be mixed up at 32:1 for general washing of your Jetski, should you
have a heavy build-up or for the first wash of an older Ski 16:1 is the recommended first application.
Jetski Trailer Care
Galvanized Jetski trailers suffer from the same salt attack and should be treated with SX50 after
every use. A 35:1 batch in a trigger spray bottle, or pressure sprayer will give you enough solution to treat
your trailer and keep the corrosive effects of salt at bay. Once you have flushed out and treated the
engines cooling system, washed the Jetski then treat the trailer, wheels and hubs with the SX50. You can use
Buster50 on the Trailer, however do not rinse it off in this case let it dry on to allow the protectants to
remain on the surface.
Photo shows a venturi mixing unit being used to treat the Jetski trailer with SX50
Jetski Engine Cooling System Flushing
Flushing SX50 solution through the raw water cooling system will remove the corrosive salt, leave
a triple protectant system behind to protect your valuable Jetski and allow your motor to run at the correct
temperature increasing engine life and reliability. Most Jetskis have a flush fitting built in making it very
easy to connect our SX50 Injector in the garden hose then onto the engine flush connection. Simply follow the
dosage and flush time guide on the back of the Injector card, run the water, add the SX50 to the bowl, connect
and wait the required time, then shut the water and engine (if running) down and the process is complete.
Photo shows the injector connected into the hose then to the engine flush. SX50 can now remove all
the harmful salt from the engine.
Wetsuits & LifeJackets
Salt is particularly harsh on these items. We have found from personal experience that giving
your wetsuits and lifejackets a short soak in SX50 solution extends the life of this equipment dramatically.
Most wetsuits are soft and supple when new and once exposed to salt they start to become stiff and board like.
Use SX50 on your suits and lifejackets they stay supple and last at least twice as long as you would expect.
If you are using our products we would love to see your photos and stories for our testimonials