More Short Product Endorsements

Rick Terpstra - Brisbane

Rick Terpstra: “I use SX50 to flush my Mercruiser engines. My mechanic tells me that this is a great way to extend the life of my engines by removing built up traces of salt and corrosion inside the seawater side of my engines. It will extend the working life of my gear and improve resale value for the future. To me, this is cheap insurance for my valuable boat.”


 Peter: I thought I would send some pictures of my recent experience with SX50. I have used the product in the past and did not hesitate to use it for my current project, a 2001 Searay powered by a mercruiser and raw water cooled, the boat was moored therefore no flushing of the engine took place. The water heater was not a pretty sight and when I removed the hoses, I found these to be choked with salt (see attached photo 1). My marine mechanic upon seeing this advised me to purchase a new raw water pump, a new recirculating pump, new manifolds and risers which I did. I wanted to make sure I flushed and left SX50 in the engine for at least a week. I bypassed the water heater and using the flush adapter, followed the instructions and flushed the engine leaving SX50 in there far around 2 weeks. We then pulled the risers and manifolds off and no salt residue, the raw water pump was removed and the recirc pump removed – no signs of salt (see pictures) and these actually did not require replacing. I have installed fresh water cooling and will be running a SX50 mixture in the fresh water side for some time to eliminate and further residue.


Sent: Saturday, 27 July 2013 1:13 PM
To: Jenny Harris

Hi Jenny,
I just wanted to say a MASSIVE thank you. I met Neil YEARS ago and he sold me a 10ltr and when I got home I thought BLOODY hell how will I use all this over the YEARS I did and EVERY boat and water craft I have EVER owned I have always used your product and told people about it. And you know what NOT ONCE EVER have I ever had a Mechanical malfunction NOT ONCE. I think if you invest in maintaining your machinery it will invest in you.....
Thank you again
Kindest Regards

Andrew Whitehead – Wellington Point QLD

... My local dive shop has used SX50 as a integral part of servicing my regulators for some years. Now I have my own supply of SX50 and Buster50!

When I come home from a diving trip, I soak my wetsuit, polypropylene suit, boots, hood and gloves in the bath overnight in Buster50, then rise them in fresh water. My BCD gets a similar treatment. This maintenance program keeps all my gear in top condition. I now use Buster50 to wash my 4WD and you can really see the difference it makes after just one wash!

 Craig Jensen - Nhulunbuy, NT

“My 140hp outboard motor had bad salt crystallization on the lower leg built up over 800hrs running and nothing I tried budged it. I thought that I'd just have to live with it but a mate told me about a product called SX50 he'd heard about and thought that I should give it a go. I spoke to Jen Harris from SX50 and she said that I should also flush my motor with SX50 as any build up in the water galleries would be removed. I applied SX50 directly on the outside of my outboard leg and it came up like it was new again. Also after flushing my motor with it a few times, the tell tail now is much stronger due to I think, SX50 cleaning things out in the water jackets. I'd recommend SX50 to anyone that wants to get optimum life out of their outboard.”

Scott Powyer - Wellington NSW

I took my Quintrex Hornet 435 to the Victoria River in the N.T. for a 12 day fishing trip. The conditions were extremely harsh in very dirty tidal water. My motor leg was white from the salt build up. With 40 deg heat, the salt dried on each day leaving a thicker coating on the motor, boat and trailer. On returning the lot was left in the shed for 2 months without washing.

The damage to the boat was so bad that I considered using a panel beater. I'd tried everything including car polish, but it wouldn't remove the build up around the weld joints.

I read an article in Club Marine magazine and decided to try the SX50 products. To see the boat now you'd swear I spent 3 days polishing it! The motor looks brand new, the galvanised trailer is great, I'm wrapped. SaltBuster is fantastic stuff. I used the Auto Mix unit to flush out the motor with SX50 and it made it so much easier. I wished I'd taken a before and after photo. I won't go anywhere without SX50 and Buster50 again. I can't praise it highly enough.

Warren Steptoe - Club Marine Fishing Correspondent

...I've tried SX50 in a variety of applications in my fishing and outboard motor world. These include painting concentrate on threadline reel bail rollers and game fishing roller runners which were jammed up with salt crystals to FREE them; and to remove unsightly salt crystals embedded into the exterior of outboard brands. I'm amazed at the results.

Mark Hillebrand – Metung VIC

...I own a 1937 Coota with a 1934 inboard motor, which I flush out with Salt-X in a plastic tank. After pumping out the seawater, I turn on the SX50 mix until it comes through the exhaust, then I turn off the motor leaving the SX50 inside the engine. This only takes a few minutes and removes any salt from around my motor.

I’m pleased SX50 protects my motor from salt corrosion.

David Moravszky – Douglas Park NSW

…..I use SX50 for flushing out my Jetski and Buster50 to wash down and clean my Jetski and trailer, both product are great and I’m very happy with the results.

Phil Ainsworth – Bundaberg South QLD

… I live on the waterfront and use SX50 to maintain my home. I spray it everywhere and quite happy with the product, I’m looking forward to using it on my new boat.

Robert Harper – Sorrento VIC

...I spray my fishing reels with SX50 and they still look like new. I use it as a maintenance after every use.

Kevin Hill – Church Point NSW

…I recently purchased a 31’ Marina which needs a fair bit of work and cleaning. The Buster50 has cleaned up the boat well, so now I’m going to soak my old anchor chain in SX50 to clean it up too!